Brother MFC-9330CDW Toner Cartridges and Parts
The following products are guaranteed to work in
the Brother MFC-9330CDW printer.
|
| Questions about products for this printer? |
Replaces TN-245
Cost per page: 0.43p
2500 pages
2200 pages
2200 pages
2200 pages £39.16 £46.99
Multipack Deal: Save £24.00
In stock
Replaces TN-241BK
Cost per page: 0.63p
2500 pages £15.79 £18.95
Buy 3+: £15.00
In stock
Replaces TN-245C
Cost per page: 0.72p
2200 pages £15.79 £18.95
Buy 3+: £15.00
In stock
Replaces TN-245M
Cost per page: 0.72p
2200 pages £15.79 £18.95
Buy 3+: £15.00
In stock
Replaces TN-245Y
Cost per page: 0.72p
2200 pages £15.79 £18.95
Buy 3+: £15.00
In stock
Replacing the Brother MFC 9330CDW toner cartridges is a very important part of printing successfully. A bad installation can cause problems that go from bad printing quality to damaging the toner cartridges or other printer parts.
Here are some easy steps that you can use to remove the used toner cartridges and install the new ones without damaging your printer or your Brother MFC 9330CDW toner cartridges.
CAUTION:
- - Do not burn or throw used toner cartridges into open flames, as this may cause a fire
- - If toner gets onto your hands or clothing, wash it off immediately with cold water. Do not use warm water as this may set the toner permanently, and you may not be able to remove the toner stains
Removing the used Brother MFC 9330CDW toner cartridge
|
|
 Step 1: Turn the printer on and open the top cover. |
 Step 2: Take out the toner cartridge and drum unit assembly for the color that needs replacement. |
 Step 3: Push the green lock lever down and take the toner cartridge out of the drum unit. |
 Step 4: Unpack the new toner cartridge, and gently shake it from side to side to distribute the toner evenly. |
Installing the new Brother MFC 9330CDW toner cartridge
|
|
 Step 5: Pull off the protective cover from the new toner cartridge. |
 Step 6: Put the new toner cartridge into the drum unit until it locks into place. The green lock lever should should lift automatically. |
 Step 7: In the drum unit, gently slide the green tab from left to right and right to left several times, in order to clean the corona wire. |
 Step 8: Insert the new toner cartridge and drum unit into the machine. |
 Step 9: Finally, close the top cover. |
|