Replacing the Konica Minolta 4690mf toner cartridges

Replacing the Konica Minolta 4690mf toner cartridges is a very important part of printing successfully. A bad installation can cause problems that go from bad printing quality to damaging the toner cartridges or other printer parts.
Here are some easy steps that you can use to remove the used toner cartridges and install the new ones without damaging your printer or you Konica 4690mf toner cartridges.

Before start replacing the Konica Minolta 4690mf toner cartridges keep in mind the following safety recommendations:

CAUTION:

• - Do not burn or throw used toner cartridges into open flames, as this may cause a fire


• - If toner gets onto your hands or clothing, wash it off immediately with cold water. Do not use warm water as this may set the toner permanently, and you may not be able to remove the toner stains


• - Be careful and do not inhale the toner
  

Removing the used Konica Minolta 4690mf toner cartridge

1. Open the printer\'s front cover

2. Pull the front lever of the color Konica Minolta 4690mf toner cartridge indicated to the right

3. Lower the lever to release the lock

4. Grab the handle of the Konica Minolta 4690mf toner cartridge to be replaced, and then pull out the cartridge

Installing the new Konica Minolta 4690mf toner cartridge

4. Take the new toner cartridge out of the bag

5. Shake the cartridge to distribute the toner

6. Insert the konica minolta 4690mf toner cartridge into the printer

7. Make sure the toner cartridge is securely install, and then peel off the protective film

8. Raise the front lever to its original position

9. Pull the lever to the left to lock it in place

10. Close the front cover

Related offers: Konica Minolta 4650dn Toner | Konica Minolta 4690mf Toner