Samsung CLP 325 Toner Cartridges and Parts
The following products are guaranteed to work in
the Samsung CLP 325 printer.
|Questions about products for this printer?|
Replacing the Samsung CLP 325w Toner Cartridges
Replacing the Samsung CLP325 toner is a very important part of printing successfully. A bad installation can cause problems that go from bad printing quality to damaging the toner cartridges or other printer parts.
Here are some easy steps that you can use to remove the used toner cartridges and install the new ones without damaging your printer or you Samsung CLP 325w toner cartridges.
Before start replacing the Samsung CLP325 toner cartridges keep in mind the following safety recommendations:
- - Do not burn or throw used toner cartridges into open flames, as this may cause a fire
- - If toner gets onto your hands or clothing, wash it off immediately with cold water. Do not use warm water as this may set the toner permanently, and you may not be able to remove the toner stains
Removing the old Samsung CLP 325w Toner Cartridges
1. Turn the machine off, then wait a few minutes for the machine to cool.
2. Using the handle, completely open the front door.
3. Grasp the handles on the samsung clp325 toner cartridge and pull to remove the cartridge from the machine.
Installing the new Samsung CLP325 Toner Cartridges
4. Take a new samsung clp 325w toner cartridge out of its package.
5. Pull out the hopper sheet from a new samsung clp 325 toner cartridge.
6. Holding both handles on the samsung clp 325w toner cartridge, throughly rock it from side to side to evenly distribute the toner.
7. Place the samsung clp 325 toner cartridge on a flat surface and remove the protecting cap.
8. Make sure that the color of the samsung clp325 toner cartridge matches the color slot and then grasp the handles on the toner cartridge. Insert the cartridge until it clicks into place.
9. Close the front door. Make sure the door is securely latched and then turn the machine on.